Electric fryers with electromechanical controls

The stand-alone electrical fryers in the NE-M series have power input ranging from 6 kW to 16 kW for each tank and have an electric panel with tilting stainless steel armoured heating elements to facilitate tank cleaning or the servicing of the electromechanical components. The electrical fryers have electromechanical temperature control thanks to a thermostat on the control panel. A safety thermostat cuts the electricity supply in the event of an anomaly to prevent the heating elements from overheating, especially useful if the oil level is too low or the thermostat malfunctions. The V-shaped tank is seamless and has a large “cold zone” to collect any fried scraps and to avoid fast deterioration in the organoleptic properties of the oil.

The installed power for the stand-alone electrical fryers ensures that the frying temperature is quickly reached and its fast recovery whenever frozen or fresh products are added to the tank. There is a large container at the bottom of the unit to collect the used oil. Standard fittings include a large basket that snugly fits the tank; two half baskets can be ordered to fry small quantities of product.


  • Body in S/S AISI 304 with rounded corners
  • Tank pressed without welding
  • Adjustable feet in S/S
  • Bin oil recovery in stainless steelwith removable upper filter
  • Drain tap with safety device
  • Additional safety thermostats
  • Armored heating elements in S/S


Technical data
Type NE-M 120 NE-M 200 NE-M 200+200
Dimensions mm 400X700X1010 400X700X1010 800X700X1010
Oil Lts to fry l 14 20 20+20
Absorbed power kW 6 - 9 10 - 16 10+10 16+16
Std. Input voltage V 400-3N-50Hz 400-3N-50Hz 400-3N-50Hz
Basket dimensions mm 240X280X120h 260X280X150h 260X280X150h
Oil container capacity l 21 21 21+21
Frozen chips production kg/h 15(6kW) 20(9kW) 22(10kW) 28(16kW) 44(20kW) 56(32kW)